|
|
 |
|
|
 LIMIT SWITCH BOX APL Series - Limit switch box |
|
 |
|
|
→ ENCLOSURE : WEATHER PROOF,IP67,EXPLOSION PROOF
→ TEMPERATURE RANGE : -20 - 85C.
→ CABLE ENTRY : 2 * 1/2NPT, 2 * 3/4NPT.
→ TERMINAL STRIPS : 8 POINTS, 9 - 24 POINTS.
→ POSITION INDICATOR : 0 - 90
 OPEN(GREEN),CLOSE(RED)
→ SWITCHES : MECHANICAL SWITCHES,
→ POTENTIOMETER : 1K OHM STANDARD,0-5K OHM.
→ CURRENT OUTPUT : 4 - 20mA,20 - 4 Ma.
→ PAINTING : POLYESTER POWER COATING
|
|
|
|
POSITIONER EPL/EPR Series - I/P positioner |
|
|
|
|
→ TYPE : LINEAR/TYPEROTARY TYPE
→ Connections : INPUT SINGLE " 4 - 20Ma(STANDARD).
→ PEEDBACK LEVER TYPE.
→ LINEAR TYPE : 10-80mm,80-150mm.
→ ROTARY TYPE : M6*40L, M8*40L, M6*60L, M8*60L
→ PRESSURE GAUGE(SUP/OUT): 4,6,10kgf/cm2)
→ CONSTRUCTION : NO TERMINAL BOX, WITH BOX.
→ OPTION : POSITION TRANSMITTER(OUTPUT 4 - 20mA).
→ TEMPERATURE RANGE : -17 - 230C
|
|
|
|
SOLENOID VALVE - VDW |
|
|
|
|
→ 적용유체 : 물,공기,오일(50cst 이하)
→ 적용 유체 온도 : -10℃ ~ 60℃
→ 주위환경 : -10℃ ~ 60℃ / 90% RH이하
→ 절연등급 : 표준 ; B / 옵션 ; H
→ 소비전력 : AC 8W / DC 12W
→ 허용 누설량 : 0㏄/min
→ 허용 전압 변동 범위 : ±10%
→ 전기 접속 방식 : 표준 ; 리드 와이어 / 옵션 ; DIN 단자(PG9)
→ 동작 형태: 직동식, 상시 폐(N.C)
→ 재질 : 바디 - 황동
실 - NBR
|
|
|
|
SOLENOID VALVE - VPSH |
|
|
|
|
→ 적용유체 : 물,공기,기름(50cst 이하), 고온스팀
→ 적용 유체 온도 : -10℃ ~ 180℃
→ 주위환경 : -10℃ ~ 60℃ / 90% RH이하
→ 절연등급 : H
→ 소비전력 : AC 8W / DC 12W
→ 허용 누설량 : 400㏄/min
→ 허용 전압 변동 범위 : ±10%
→ 전기 접속 방식 : 표준 ; 리드 와이어 / 옵션 ; DIN 단자(PG9)
→ 동작 형태 : 파이롯트 방식, 상시 폐(N.C) / 옵션 ; 상시 개(N.O)
→ 재질 : 바디 - 황동
실 - PTFE
|
|
|
|
AIRFILTER REGULATOR - Type-300 Air Filter Regulator |
|
|
|
|
→ Port Size : (In, Out and Gauge) 1/4″N.P.T.
→ Output Ranges : 0-10 psig (0-70 kPa), 0-30 psig (0-200kPa)0-60 psig (0-400 kPa), 0-120 psig (0-800 kPa)
→ Maximum SupplyPressure : 250 psig (1700 kPa)
→ Mounting : Pipe or Through Body
→ Flow Capacity : 22 SCFM (33.0 ㎥/hr) at 100 psig (700 kPa)supply with 20 psig (140 kPa) output
→ Exhaust Capacity : 0.1 SCFM (0.17 ㎥/hr) with downstreampressure 5 psig (35 kPa) above set point
→ Sensitivity : 1″(2.5 ㎝) of water
→ Air Consumption : less than 5 SCFH (0.17 ㎥/hr)
→ Effect of Supply Pressure Variation : less than .2 psig (1.4 kPa) for 25 psi (170 kPa) change
→ Body : Diecast Aluminum Alloy, Irridite and Baked Epoxy Finish
→ Filter : 40 Micron Phenolic Impregnated Cellulose
→ Diaphragm : Nitrile Elastomer and Nylon Fabric
→ Valve Seat Plug : Nitrile Elastomer
→ Additonal Materials : Brass, Zinc Plated Steel, Acetal
→ Weight : 725 g (1.6 lb.)
|
|
|
|
 |
|
